Cloth loupe
Move the glass over a drawn cloth. Density, denier, ply, and finish change what you see. Not a mill photo.
How yarn denier, filament count, and sett shape woven cloth
A woven fabric's hand feel, opacity, and seam slippage resistance are governed by the balance between yarn linear density (denier), filament count (DPF), and thread spacing (ends and picks per cm). Before ordering a physical strike-off, use the cloth loupe and reference matrix below to compare how 50D–300D polyester yarns pack across plain, twill, satin stripe, and blackout weaves.
Square-Sett Estimate: Ends/cm ≈ (GSM × 45) ÷ Denier · Ends/inch (EPI) = Ends/cm × 2.54
Denier Per Filament (DPF) = Total Yarn Denier ÷ Filament Count [e.g., 75D/72F = 1.04 DPF · 75D/144F = 0.52 DPF microfiber]
110 GSM (3.24 oz/yd²) · 75 D / 36F · 1-ply · 280 cm
Move the pointer or use arrow keys. The glass shows filaments and ply. Sett is a square-sett estimate.
Spec
Usual 30–400. Limit 1–2000.
Usual 20–600. Limit 1–3000.
Usual 1–144. Limit 1–576.
Usual 80–360. Limit 10–600.
Same spec, other units
- GSM
- 110 GSM · 3.24 oz/yd²
- Yarn denier
- 75 D · 83 dtex · 8.3 tex · Ne 71
- Approx. square sett
- 66.0 ends / cm · 168 ends / in
- Width
- 280 cm · 110 in
Common mill programs
Home-textile starting points. Not pass/fail limits.
Pick a colour or paste a hex. Warp stays a shade darker unless you change it.
5 core polyester mill constructions compared
Reference yarn specs, thread densities, GSM bands, and weave structures run on Weaverine's 650+ waterjet looms:
| Mill construction | Warp × Weft yarn | Finished GSM & width | Weave & optical character |
|---|---|---|---|
| Voile & sheer curtain | 50D/24F FDY × 50D/24F FDY | 55–70 GSM · 280–300 cm | 1/1 Plain (open sett, ~26 × 24 /cm) |
| Pongee lining (190T–300T) | 50D/24F FDY × 75D/72F DTY | 65–85 GSM · 150–160 cm | 1/1 Plain (tight sett, 190T–300T) |
| Brushed peachskin bedding | 75D/72F DTY × 150D/144F DTY | 85–110 GSM · 240–300 cm | 1/1 Plain or 2/1 Twill (sueded face) |
| Hotel satin stripe (dobby) | 75D/72F DTY × 150D/144F DTY | 115–135 GSM · 260–315 cm | 1 cm Dobby Satin Band (48 × 32 /cm) |
| 3-pass / dimout blackout | 75D DTY face/back + 300D black weft | 210–280 GSM · 280–300 cm | Triple-weave dimout or 3-pass coated |
Values represent standard export production ranges; exact EPI × PPI and finished GSM depend on stenter heat-set width and wet-finishing route.
Thread density (sett) and filament fineness formulas
The loupe uses a square-sett approximation (equal warp and weft density) to illustrate optical cover; production specs often pack higher warp density than weft.
Ends/cm (square sett) ≈ (GSM × 45) ÷ Yarn Denier
DPF = Total Yarn Denier (D) ÷ Filament Count (F)
Common questions
- Is this a real sample?
- No. A drawing so you can see how structure moves with the spec. Confirm on a sample.
- How is sett calculated?
- Ends/cm ≈ GSM × 45 / denier, assuming a square sett. Real programs can differ warp vs weft.