Skip to content
All notes
ExplainerBy Wren Thunderborn, Head of Content

How Is Polyester Made? From PTA and MEG to Woven Fabric

Polyester is made in two chemical steps and three textile ones: PTA and MEG become PET, PET becomes filament, filament becomes yarn, yarn becomes cloth. Here is each stage, what it controls, and where a mill's responsibility starts.

Polyester is made in two chemical steps and three textile ones. PTA and MEG react to form PET; PET is melted and spun into filament; filament becomes yarn; yarn is woven into cloth. Each step is owned by a different kind of factory, and the hand of the finished fabric is already being decided in the first two.

That distinction matters when a buyer writes a specification. "Polyester" on a purchase order describes the polymer, not the cloth — and the same polymer can arrive as crisp taffeta, brushed peachskin or a soft blackout drape depending on the yarn and the weave.

The short answer

  1. PTA + MEG → PET (polymerisation, at a chemical or fibre plant)
  2. PET chips → filament yarn (melt spinning, drawing, texturising)
  3. Filament → greige cloth (warping, sizing, weaving)
  4. Greige → finished fabric (dyeing, printing, finishing)
  5. Finished fabric → product (cutting, sewing, or converting)

Steps 3 and 4 are where a weaving mill works; step 5 belongs to the converter. Steps 1 and 2 belong to fibre producers, and that boundary is one of the most misunderstood parts of the polyester supply chain.

Step 1 — PTA and MEG become PET

Purified terephthalic acid (PTA) and monoethylene glycol (MEG) are the two monomers. In an esterification reactor they combine under heat; a polycondensation stage then links the units into long polymer chains. The output is PET — polyethylene terephthalate — expressed as pellets or chips.

The degree of polymerisation matters downstream: it governs melt viscosity, and therefore how stable the fibre is when it is spun and drawn. Chips are dried before spinning, because moisture in PET hydrolyses the polymer and weakens the filament.

This is also why "recycled" polyester is not a different material. rPET is made by depolymerising or re-melting bottle flake and re-forming the same PET chain. The molecule is the same; the feedstock and the certification trail are what differ.

Step 2 — PET becomes filament yarn

The fibre plant melts the chips and pushes the melt through a spinneret — a plate with hundreds of fine holes. Each hole produces one continuous filament. The filaments are quenched with air, then drawn (stretched) to align the polymer chains and build tenacity.

The drawing and texturising choices produce the yarn types buyers see on a specification:

YarnWhat it isWhere it goes
FDY (fully drawn)Drawn in-line, sold smooth: crisp, lustrous, stableTaffeta, many lining fabrics
DTY (draw textured)False-twist texturised: crimp, bulk, softer handPongee, many bedding fabrics
POY (partially oriented)An intermediate, drawn or textured laterFeeds later drawing lines
StapleFilament cut into short lengths, spun like cottonA matte, cotton-like hand rather than a glassy one

Denier (the weight in grams of 9,000 metres of yarn) is fixed here too. It is a property of the yarn, not of the cloth — which is why the same 75D yarn can end up in a light lining or a dense down-proof shell depending on sett and finish.

Step 3 — Filament becomes greige cloth

At the mill, yarn arrives on cones and is wound onto warp beams in the order the fabric design requires. Warp yarns are usually sized — coated with a temporary starch or size film — to survive the friction of weaving. The beams are drawn in through heddles and reed, and the loom interlaces warp and weft.

A waterjet loom does this with a fine jet of water carrying the weft across the shed; it is the standard machine for polyester filament because it is fast and gentle on the yarn. The cloth that comes off the loom is greige, or loom-state fabric: unbleached, still carrying the warp size, and dimensionally close to its final form.

This is the stage a weaving mill is actually responsible for — and the stage our own production covers:

  • Weaverine's 650+ waterjet looms, weaving 100% polyester greige
  • 55–120 GSM loom-state, finishing to roughly 60–140 GSM
  • 160–330 cm greige width, 150–315 cm finished width
  • daily output above 200,000 m, all from purchased FDY and DTY yarn

Step 4 — Greige becomes finished fabric

Greige can ship as-is — stock greige from this mill carries no minimum — but most programmes are desized, scoured, bleached, dyed or printed, then finished — softened, calendered, brushed, coated or given a property such as stain resistance or blackout.

Each of those steps moves weight, width and hand. That is why a specification that says only "polyester fabric, 110 GSM" is incomplete: greige GSM and finished GSM are different numbers, and the finishing route decides which is which.

Where the mill sits, and what to ask the supplier

A weaving mill buys yarn; it does not polymerise PET or spin filament. So when a supplier is asked "how is your polyester made", the honest answer has two halves: the polymer and fibre come from the upstream chain, and the cloth comes from the mill.

The questions that actually protect a programme are narrower and more useful:

  • Yarn type: FDY or DTY, filament or staple?
  • Denier: what is the warp and weft yarn size?
  • Feedstock: virgin PET or GRS-certified rPET? Which certificate covers the lot?
  • Stage: is the quoted GSM greige or finished?
  • Construction: plain, twill, dobby — and what sett?

Those five answers predict the hand, the drape, the price and the care instructions far more reliably than the word "polyester" does.

Three things people get wrong

"Polyester is plastic cloth." Polyester is a synthetic fibre made from a polymer; the fabric is a woven textile whose performance comes from yarn and construction as much as chemistry.

"Denier and GSM are the same." Denier describes the yarn; GSM describes the cloth's area weight. A dense sett with fine yarn and a loose sett with coarse yarn can land at the same GSM with completely different hands.

"Recycled polyester is a different fibre." It is the same PET molecule with a different feedstock and a certified chain of custody. Buyers should ask for the certificate, not assume a property change.

For the fibre-level definitions, see polyester fiber; for the woven families it becomes, see types of polyester fabric; for yarn size and conversion, denier and the polyester yarn denier guide. For what the loom produces before finishing, see greige fabric, and for the rPET route, regenerated vs virgin polyester. To put a specification on a live programme, start from greige fabric programmes or request a quote.

Questions buyers ask

How is polyester made?
PTA and MEG react to form PET; the PET is melted, extruded through spinnerets into filament, drawn or texturised, then spun into yarn and woven into cloth. Polymerisation and spinning belong to fibre producers; a weaving mill buys the yarn.
What is polyester made of?
Two petrochemicals: purified terephthalic acid (PTA) and monoethylene glycol (MEG). They react to form polyethylene terephthalate, PET — the polymer that is later melted, spun into filament, twisted into yarn and woven into cloth.
Is polyester made from oil?
Mostly yes. PTA and MEG are refined from petroleum, and natural gas is used in the process. Recycled polyester (rPET) starts from bottle or textile feedstock instead, but the molecule produced is the same PET.
How is polyester fiber made?
PET is dried, melted and extruded through spinnerets, then quenched and drawn. The result is filament — continuous strands. Filament sold as-is is FDY; texturised filament is DTY; chopped and re-spun filament becomes staple yarn that handles more like cotton.
How is polyester fabric made?
Yarn is wound onto warp beams, sized, drawn in and woven — warp and weft crossing on a loom — producing greige (loom-state) cloth. Dyeing, printing and finishing follow. A mill can also buy filament and skip the fibre stages entirely; that is the normal arrangement in home textiles.
Does a weaving mill make the polyester itself?
Normally no. Polymerisation and spinning belong to fibre producers; a weaving mill buys FDY or DTY yarn and takes responsibility from the yarn inward. The useful buyer question is not "who made the polymer" but which yarn, at what denier, FDY or DTY, virgin or rPET.
Share: